SigGen 0.2.4 and the Character Page

by **zanix** » Sat Mar 10, 2007 3:38 am

NO LONGER VALID WITH SIGGEN 0.2.5

Since SigGen version 0.2.4, you may have noticed that the signature and avatar images do not work correctly on the character pages in Roster 1.7.3

This is because the syntax of the url to access SigGen has been changed
name= changed to member=

The signature and avatar being shown on the character pages is a relic from pre-1.5.0 Roster when img.php was generating the signatures
It has since been updated to use SigGen

Open memberdetails.php
Find

Code: Select all: if($roster_conf['show_signature']) print "<img onmouseover=\"return overlib('To access this signature use: ".$roster_conf['roster_dir']."/addons/siggen/sig.php?name=".urlencode(utf8_decode($name))."',CAPTION,'Signature Access',RIGHT);\" onmouseout=\"return nd();\" ". "src=\"".$roster_conf['roster_dir']."/addons/siggen/sig.php?name=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Signature Image for $name\" /> \n"; if($roster_conf['show_avatar']) print "<img onmouseover=\"return overlib('To access this avatar use: ".$roster_conf['roster_dir']."/addons/siggen/av.php?name=".urlencode(utf8_decode($name))."',CAPTION,'Avatar Access');\" onmouseout=\"return nd();\" ". "src=\"".$roster_conf['roster_dir']."/addons/siggen/av.php?name=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Avatar Image for $name\" />\n";

Replace with

Code: Select all: if($roster_conf['show_signature']) print "<img onmouseover=\"return overlib('To access this signature use: ".$roster_conf['roster_dir']."/addons/siggen/sig.php?member=".urlencode(utf8_decode($name))."',CAPTION,'Signature Access',RIGHT);\" onmouseout=\"return nd();\" ". "src=\"".$roster_conf['roster_dir']."/addons/siggen/sig.php?member=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Signature Image for $name\" /> \n"; if($roster_conf['show_avatar']) print "<img onmouseover=\"return overlib('To access this avatar use: ".$roster_conf['roster_dir']."/addons/siggen/av.php?member=".urlencode(utf8_decode($name))."',CAPTION,'Avatar Access');\" onmouseout=\"return nd();\" ". "src=\"".$roster_conf['roster_dir']."/addons/siggen/av.php?member=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Avatar Image for $name\" />\n";

by **SethDeBlade** » Sat Mar 10, 2007 10:50 am

the

Code: Select all: <?php

inside the code you posted is not correct i think. It is not like this in the file. This might be a bit confusing

by **zanix** » Sat Mar 10, 2007 11:16 am

That is because the php highlighter is putting it there

But it can be fixed by putting a tab before the first line
Or making the first line a php comment

by **Jardo** » Sun Mar 11, 2007 5:06 am

Would this be correct for non LEO ?

Code: Select all: if($roster_conf['show_signature']) print "<img onmouseover=\"return overlib('To access this signature use: ".$Server."/index.php?name=WoWRosterDF&file=addon&roster_addon_name=siggen&mode=Signature&member=".urlencode(utf8_decode($name))."',CAPTION,'Signature Access',RIGHT);\" onmouseout=\"return nd();\" ". "src=\"".$Server."/index.php?name=WoWRosterDF&file=addon&roster_addon_name=siggen&mode=Signature&member=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Signature Image for $name\" /> \n"; if($roster_conf['show_avatar']) print "<img onmouseover=\"return overlib('To access this avatar use: ".$Server."/index.php?name=WoWRosterDF&file=addon&roster_addon_name=siggen&mode=Avatar&member=".urlencode(utf8_decode($name))."',CAPTION,'Avatar Access');\" onmouseout=\"return nd();\" ". "src=\"".$Server."/index.php?name=WoWRosterDF&file=addon&roster_addon_name=siggen&mode=Avatar&member=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Avatar Image for $name\" />\n";

Seems to work for me. Someone may be able to streamline it a bit,=.

by **zanix** » Sun Mar 11, 2007 8:56 am

If you are talking about WoWRosterDF, it already has name= converted to member=

by **Malkom** » Mon Mar 12, 2007 5:10 pm

Work Fine ^^

Thanks zanix

by **Devlinm** » Wed Mar 14, 2007 4:50 pm

this is what i have in the latest wow roster DL, and it does not appear that name was converted to member in the entire string, i still see calls to the name= in the df section, and i dont want to use the code above because its not for the port. from my knowledge, i should just beable to change the name= to member= where it is wrong correct?

/*roster version
if($roster_conf['show_signature'])
print "<img onmouseover=\"return overlib('To access this signature use: ".$roster_conf['roster_dir']."/addons/siggen/sig.php?name=".urlencode(utf8_decode($name))."',CAPTION,'Signature Access',RIGHT);\" onmouseout=\"return nd();\" ".
"src=\"".$roster_conf['roster_dir']."/addons/siggen/sig.php?name=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Signature Image for $name\" /> \n";

if($roster_conf['show_avatar'])
print "<img onmouseover=\"return overlib('To access this avatar use: ".$roster_conf['roster_dir']."/addons/siggen/av.php?name=".urlencode(utf8_decode($name))."',CAPTION,'Avatar Access');\" onmouseout=\"return nd();\" ".
"src=\"".$roster_conf['roster_dir']."/addons/siggen/av.php?name=".urlencode(utf8_decode($name))."&saveonly=0\" alt=\"Avatar Image for $name\" />\n";
*/
//wowrosterdf version
if($roster_conf['show_signature'])
print "<img onmouseover=\"return overlib('To access this signature use: ".$roster_conf['roster_dir']."/addons/siggen/sig.php?name=".urlencode(utf8_decode($name))."',CAPTION,'Signature Access',RIGHT);\" onmouseout=\"return nd();\" ".
"src=\"".getlink($module_name.'&file=addon&roster_addon_name=siggen&mode=signature&member='.urlencode(utf8_decode($name)).'&saveonly=0')."\" alt=\"Signature Image for $name\" /> \n";

if($roster_conf['show_avatar'])
print "<img onmouseover=\"return overlib('To access this avatar use: ".$roster_conf['roster_dir']."/addons/siggen/av.php?name=".urlencode(utf8_decode($name))."',CAPTION,'Avatar Access');\" onmouseout=\"return nd();\" ".
"src=\"".getlink($module_name.'&file=addon&roster_addon_name=siggen&mode=avatar&member='.urlencode(utf8_decode($name)).'&saveonly=0')."\" alt=\"Avatar Image for $name\" />\n";

?>

by **foreseit** » Wed Mar 14, 2007 9:36 pm

Is there anyway to make the SigGen code redirect a "?name=" into a "?member="? The only reason I ask is that I made my siggen my sig for a lot of posts. All the old posts are now displaying the "Sig Gen Works" instead of the pictures. I could go in and edit it, but... that would take a lot of work. Hope that makes sense!

by **zanix** » Wed Mar 14, 2007 10:17 pm

SigGen 0.2.4 was made to work in WoWRosterDF with no edits, and this change was required since DF uses name= to select the module

If this is your signature, can you should just be able to change it in your preferences on your forums then all your signatures would be updated

by **JAVO** » Fri Mar 23, 2007 10:06 am

I went to 0.2.4 today and got the same SigGen Works image on the top of the page...
I made the edit to the memberdetails.php file as mentioned above and now I just get a red X where the signature should be...
Any ideas?

by **zanix** » Fri Mar 23, 2007 10:17 am

Yeah, you didn't do the edit correctly, or SigGen doesn't work on your server
Open the image in it's own window and make sure the url is correct

by **JAVO** » Fri Mar 23, 2007 11:07 am

DOH!

Youre right... Formatting was off from when I copied from above... Sorry for the trouble...

by **fhmilamber** » Tue Mar 27, 2007 12:40 pm

Thanks, worked perfect for me.

by **shan_aya** » Mon Apr 23, 2007 10:27 pm

hum...
please i need help...

i use this in profil phphbb :

Code: Select all: [url=http://loupsjustice.guild-heberg.fr/roster/char.php?name=Felysaya&server=Kirin%20Tor][img]http://loupsjustice.guild-heberg.fr/roster/addons/siggen/sig/Felysaya.png[/img][/url]

how using your new format displaying signature in phpbb ?

and secondary how activate uniuploader fix in UU permitting each member save their image to server almost long guild update

thx

by **chapi456** » Thu May 10, 2007 6:11 am

Same issue : in phpbb as url like

Code: Select all: http://something.com?member=Blabla

( url with '?' are not recognised as images) ... is there a way to have a direct address (without a parameter : generate sig on update ? , ...)

Another issue in French : Draenei is written : Draeneï ...
Changing this in localization file leads to no sig or ava anymore